Search | Engineering

订阅投稿

首页工程期刊工程焦点工程成就工程前沿关于我们 English

资源类型

期刊论文 3

年份

2022 1

2017 1

2015 1

关键词

检索范围：

排序：展示方式：

Achievement of high rate nitritation with aerobic granular sludge reactors enhanced by sludge recirculation

Zulkifly JEMAAT,Josep Anton TORA,Albert BARTROLI,Julián CARRERA,Julio PEREZ

《环境科学与工程前沿（英文）》 2015年第9卷第3期页码 528-533 doi: 10.1007/s11783-014-0641-5

摘要： A ratio control strategy has been used to demonstrate the feasibility of this automatic control procedure for the achievement of stable full and partial nitritation. The control strategy assured constant ratio between the dissolved oxygen (DO) and the total ammonia nitrogen (TAN) concentrations in the bulk liquid of aerobic granular sludge reactors operating in continuous mode. Three different set-ups with different reactor capacities were used (3, 110, and 150 L). High strength synthetic wastewaters and reject water were tested with similar performance. Achieved nitrogen loading rates ranged between 0.4 and 6.1 kgN·m ·d , at temperatures between 20°C and 30°C. Granular sludge and nitritation were stable in the long term continuous operation of the reactors. Suitable stable effluent for Anammox has been obtained using the desired TAN setpoint (i.e. 50% of influent ammonium oxidation). An existing biofilm model developed incorporating the implemented control loops and validated in a previous publication was used to investigate the effects of the ammonium concentration of the influent and the biofilm density on the achievement of full nitritation. The model demonstrated how sludge recirculation events led to a stable and significant increase of the biomass concentration in the reactor, which in turn resulted in the achievement of high nitrogen loading rates, due to the action of the control strategy. The model predicted an enhancement of stable full nitritation at higher ammonium concentrations in the influent. Poor influence of the biofilm density in the achievement of full nitritation was predicted with the model.

关键词： partial nitrification reject water high strength ammonium wastewater closed-loop control

HTML PDF 收藏

nutrients removal from municipal wastewater through biological phosphorus removal followed by partial nitritation

Yandong Yang,Liang Zhang,Hedong Shao,Shujun Zhang,Pengchao Gu,Yongzhen Peng

《环境科学与工程前沿（英文）》 2017年第11卷第2期 doi: 10.1007/s11783-017-0911-0

摘要： EBPR and PN/A were combined to enhance nutrients removal from municipal wastewater. High effluent quality of 0.25 mg TP?L and 10.8 mg TN?L was obtained. Phosphorus and nitrogen removal was achieved in two separated units. A proper post-anoxic phase improved the nitrogen removal performance of PN/A unit. Conventional biological removal of nitrogen and phosphorus is usually limited due to the lack of biodegradable carbon source, therefore, new methods are needed. In this study, a new alternative consisting of enhanced biological phosphorus removal (EBPR) followed by partial nitritation-anammox (PN/A), is proposed to enhance nutrients removal from municipal wastewater. Research was carried out in a laboratory-scale system of combined two sequencing batch reactors (SBRs). In SBR1, phosphorus removal was achieved under an alternating anaerobic-aerobic condition and ammonium concentration stayed the same since nitrifiers were washed out from the reactor under short sludge retention time of 2–3 d. The remaining ammonium was further treated in SBR2 where PN/A was established by inoculation. A maximum of nitrogen removal rate of 0.12 kg N?m ?d was finally achieved. During the stable period, effluent concentrations of total phosphorus and total nitrogen were 0.25 and 10.8 mg?L , respectively. This study suggests EBPR-PN/A process is feasible to enhance nutrients removal from municipal wastewater of low influent carbon source.

关键词： Phosphorus removal Partial nitrification Anammox Municipal wastewater